Mounting & Framing Information

MOUNTING DETAILS

  • All Maxwell Muller mounts are designed and produced with a premium frame mount.

  • This premium frame mount has a double-bar structure, ensuring strength and support for your prints.

  • Mounts include all hanging hardware (a wire, making it quick and easy to hang wherever you need, screws, and a level to ensure proper hanging)

FRAMING DETAILS

  • All frames are a custom black floater frame that is flush with the metal print and has a ¼” separation from the image to the inner edge of the frame, and another ¼” to the outer edge of the frame.

  • Frames include all hanging hardware (a wire, making it quick and easy to hang wherever you need, screws, and level to ensure proper hanging)

HANGING INSTRUCTIONS

Smaller Prints:

  • Hold print to wall in the desired position

  • Lightly mark pencil on wall at desired height and location

  • Apply screw into your wall

  • Leave screw 1/8" to 1/4" from wall to hang

  • Hang and check with level

Medium & Larger Prints:

  • Grab a friend

  • Hold print at desired location and keep it straight using a level

  • Lightly mark pencil on wall at desired height and location

  • Gently place frame against the wall in desired position

  • Before loosening your grip, slowly let the print set on the screws

  • Once you feel the print has secured a position on the nails, you can slowly loosen your grip; but do not let go if you feel one or both sides of the print dropping. If you feel/see the print dropping past the desired position, you will need to take the print off the wall and properly place the wire on the nails

 
 

Image featured above is Brazure